Sector 31 sits in Faridabad's newer planned sector grid, adjacent to Sector 30 and Sector 32. Its number is shared with the Sector 31 Industrial Area — a separate commercial belt listed among Faridabad's industrial areas, distinct from the residential sector with the same number. The two are different addresses with different buyers, and a delivery to one is not a delivery to the other.
Quick answer: Yes, we supply the 26% Himalayan hemp / 74% Tencel™ blend to both the residential Sector 31 and the Sector 31 Industrial Area. A residential Sector 31 shop is supplied on the neighbourhood retail basis. A Sector 31 Industrial Area unit is supplied on the bulk garment-unit basis. A business that operates from both — a shop on one side and a stitching unit on the other — is supplied on a combined basis, which is the specific case this page is written for.
Sector 31 is one of three sectors in our set with the residential-plus-industrial structure, alongside Sector 28 and Sector 29. What makes this page different from those two is that it takes the pattern further, into the case of a **business operating from both addresses at once** — a stitching unit in the industrial area supplying garments to a retail shop in the residential sector, both under the same ownership and often under the same shop name on the customer-facing side. That combined case asks questions the pure-wholesale and pure-retail pages do not: how to split a single stock between the two, how to route a delivery when both need cloth on the same week, and how to keep the shade consistent when the same customer might buy a metre from the shop and order a garment from the unit in the same visit.
If you operate from only one side, the Sector 28 page carries the fuller introduction to the dual-address pattern and is the better read. If you operate from both, this page is written for you.
Sector 31 is in the newer planned grid and its number covers two distinct places — the residential sector and the Sector 31 Industrial Area — so the specific address on the order is what the dispatch is planned against.
Faridabad's planned sector grid extends well beyond the original 14–17 cluster. Sectors in the twenties and thirties went up as the planned city expanded, and Sector 31 sits within that newer spread. The residential sector serves local residents in the same way as the original grid — fabric shops, stitching units, a neighbourhood customer who walks in with a garment in mind.
The Sector 31 Industrial Area is a separate commercial belt with the same number, listed on the Faridabad city page alongside Sector 24, 28, 29, 32, 58 and 59. It is a garment-unit and stitching-unit belt — the same kind of business as the industrial areas around Sector 24 and 58, working against a production plan, buying in bulk. A delivery to the industrial area is not a delivery to the residential sector, and vice versa.
What makes Sector 31 slightly different from the other dual-address sectors in the set is the **proximity of the two addresses**. Sector 28 and Sector 29 have industrial areas that sit a short drive from the residential sectors. Sector 31's industrial area is in the same sector as its residential counterpart, which means a business with a shop on one side and a stitching unit on the other is operating from two addresses that are genuinely minutes apart. That has practical consequences for how stock moves between them, and it is why the straddle case is worth covering in detail rather than as a footnote.
A business with a shop in the residential sector and a stitching unit in the industrial area is effectively two buyers using one supplier — the cloth is the same, but the buying questions differ, and the right way to buy is different from either address on its own.
Most Faridabad businesses that operate from both addresses are small garment makers who decided to open a shop to sell their own output directly, or traders who set up a stitching unit to make the pieces they could not reliably source. In either direction, the shop and the unit serve different purposes: the shop is the customer-facing side, the unit is the production side, and the two are linked by a shared brand and often a shared shop name on the invoice.
For buying cloth, three things follow from that structure, and each has a different practical answer from the pure-retail or pure-wholesale case.
On the order itself, the practical advice is to tell us at enquiry that you operate from both addresses, and to say roughly how the cloth will be split. A straddle business that buys as if it were a pure shop tends to under-reserve for the unit's runs; a straddle business that buys as if it were a pure unit tends to over-commit on a lot for the shop's counter trade. The combined basis sits between the two, and it only works if we know what the split is.
One reservation across both addresses, not two — the cloth should come from the same lot whether it ends up on the shop counter or in a garment, because the finished garment can be bought back to the same shop for matching later.
The single most common mistake a straddle business makes is to set up two separate stock records — one for the shop and one for the unit — and to buy against each independently. It seems efficient because it matches the way a shopkeeper thinks about retail stock and a unit manager thinks about production stock, but it almost always produces a shade mismatch within one season. The shop sells a metre from lot A, the unit makes a garment from lot B a few weeks later, the customer brings back a piece from lot A to compare against the garment from lot B, and the difference is visible. Splitting the reservation is what creates that problem, and keeping it whole is what prevents it.
Three practical rules for keeping the reservation whole while running two addresses.
The benefit of keeping the reservation whole is not just shade consistency. It is also that a straddle business tends to buy more cloth over a season than it initially estimates, and a single reservation against a single lot lets the buyer increase quantity mid-season without opening a new order. A separate-reservation structure forces a new minimum order every time the unit runs heavier than planned, which is exactly the situation a straddle business is trying to avoid.
Send each consignment to whichever address needs the cloth first, from the same reservation — but tell us the reason when you order, so the dispatch is planned against the real flow rather than an assumption.
For a single-address business, delivery is straightforward: the cloth arrives where the business is. For a straddle business, the question is which side of the operation needs it more urgently, and the answer changes order by order. Three patterns we see regularly in Faridabad, each with a different routing answer.
Two practical notes on routing. First, if the delivery is going to the industrial area, tell us the plot number and gate in advance, because industrial belts typically restrict vehicle access more tightly than residential addresses and the dispatch is planned against the actual rule rather than an assumption. Second, if the delivery is going to the residential shop, tell us the shop's address even if the shop and the unit share the same owner — the two are different addresses on the delivery note, and the dispatch is planned against the address it is going to, not against the owner's principal place of business.
One routing pattern we would actively discourage: delivering to both addresses from two separate orders because the shop and the unit have different buyers placing them. A straddle business where the shop manager orders for the counter and the unit manager orders for the cutting floor, without coordinating, will end up with two reservations, two lot numbers, and a season of shade problems. The right answer is one reservation, one combined order, split by delivery address — which requires the two sides of the business to place the order together, once a season, with the split agreed up front.
Sector industrial areas like Sector 31 tend to be smaller-scale and more flexible on minimum quantities than the larger DLF and IMT belts — which suits a straddle business that is also selling at retail.
Faridabad's industrial landscape is not one belt but several, and where a stitching unit sits within it shapes how the unit buys. The larger belts — DLF Industrial Area, IMT Faridabad, the Sector 58 and 59 industrial areas — tend to be bigger operations with longer production runs and higher minimums, suited to export consolidators and garment units that cut thousands of pieces per style. The sector industrial areas — Sector 24, 28, 29, 31, 32 and a handful of others — tend to be smaller units with shorter runs, more flexibility on quantities, and a closer relationship with the domestic market than with export orders.
For a straddle business, the sector industrial area model fits better on three counts.
None of this is specific to Sector 31 alone. The same dynamics apply to Sector 24, 28, 29 and 32. What is specific to Sector 31 is that its industrial area is one of the more accessible sector belts for a straddle business, because of the proximity to the residential sector. If you are considering the shop-plus-unit model and are currently weighing where to locate the unit, the sector industrial areas are worth prioritising over the larger belts for this reason — even if the larger belts have more capacity.
The cloth is a fixed 26% hemp and 74% Tencel™ lyocell blend; width, weight and finish are confirmed per lot at enquiry so the metre the shop sells matches the metre the unit cuts.
| Fibre blend | 26% Himalayan hemp, 74% Tencel™ lyocell |
|---|---|
| Fibre origin | Himalayan foothills, above 1,800 metres |
| Width | Confirmed per lot at enquiry |
| Weight (gsm) | Confirmed per lot at enquiry |
| Colour options | Natural and undyed; dyed to Pantone on request |
| Suited to | Shirts, kurtas, dresses, relaxed trousers, soft jackets, loungewear |
| Stitching notes | Fine ballpoint or light sharp needle; short stitch length; presses well at medium heat; shrinkage measured on a wash test |
| Stocking quantity | Combined shop-plus-unit trial orders and repeat stock, sized to both draws |
| Samples | Free swatches and cutting lengths; courier charges payable by the recipient |
| Certification | GOTS and OEKO-TEX 100 documents shared with the sample kit, as applicable to the lot |
| Delivery | Sector 31 residential and Sector 31 Industrial Area; wider Faridabad and NCR |
Specification last reviewed: 21 October 2026.
Same terms as the rest of the Faridabad market — pricing against construction, quantity and lot, lot reservation against a season where quantity allows, standard wholesale paperwork, and free samples with no minimum.
The full wholesale approach is on the NIT Faridabad page, which covers the belt-level questions any Faridabad trader asks — how pricing works, how a lot reservation holds a season together, and what paperwork travels with a consignment. The short version for a Sector 31 buyer, whether a residential shop, an industrial unit or a straddle business:
If you operate from both addresses and want to make up a sample garment before committing to stock, ask for a cutting length rather than a swatch. A metre is enough to make a single garment and see how the cloth behaves on your own machines, and it can be tested against the shop's display cloth at the same time — which is the specific advantage a straddle business has over a pure wholesale buyer.
Sector 28 carries the introduction to the dual-address pattern; Sector 15 and Sector 14 carry the residential shop case; the Faridabad city page carries the industrial case.
If you operate from both addresses — a shop in the residential Sector 31 and a stitching unit in the Sector 31 Industrial Area — send us the shop address, the unit address, roughly how the cloth will be split between them, and the construction and quantity you have in mind. We will respond with a specific combined figure and a delivery plan for the split. If you operate from one address only, tell us which, and send the construction, quantity and address. The Sector 28 page is the better read if your business sits on only one side of the dual-address structure.
One note for the wider set. Sector 31 is the third sector in the /locations/ folder with the residential-plus-industrial structure, after Sector 28 and Sector 29, and this page carries the fullest treatment of the straddle case — the business that operates from both sides at once. If a fourth sector with the same structure is added — Sector 32, for instance — its page should point here rather than repeating the straddle material. The right place for further sector names without their own pages is the areas we serve page, as named entries with anchors.
Sector 31 sits in Faridabad's newer planned sector grid, adjacent to Sector 30 and Sector 32. Its number is shared with the Sector 31 Industrial Area, a separate commercial belt — the two are distinct addresses with the same number, and a delivery to one is not a delivery to the other. Confirm the specific address when you order so the dispatch is planned against the right location.
Yes. Shops with a Sector 31 residential address are supplied on the same terms as the rest of the Faridabad retail market — same blend, same lot reservation, same paperwork, same delivery arrangements. The customer base in the residential sector is essentially the same as in the original grid: a local resident who walks in with a specific garment in mind.
Yes. The Sector 31 Industrial Area is one of the industrial belts covered on the Faridabad city page — garment units and stitching businesses there are supplied on the same bulk basis as the industrial areas around Sector 24, 28, 29, 32, 58 and 59. Send the unit address, the garment you plan to make and your quantity, and we will confirm sample and bulk delivery arrangements.
Yes, and it is worth telling us at enquiry that you operate from both addresses. The cloth is the same, but the buying questions differ. A shop buys in metres to sell by the metre, with the counter and the display as the primary channel. A stitching unit buys in metres to cut, with production run and garment output as the primary measure. A business that operates from both is effectively two buyers using one supplier, and the quote and the delivery schedule should reflect that rather than forcing one address to do both jobs.
Two principles. First, one reservation across both addresses, not two — the cloth should come from the same lot whether it ends up on the shop counter or in a garment, because the finished garment can be bought back to the same shop for matching later. Second, a clear physical split: some of the cloth physically sits at the shop and some at the unit, and the record that tracks the reservation should show which is which. A single reservation with two draws is manageable; two separate reservations is what causes shade mismatches between a garment and a subsequent metre bought from the shop.
Whichever needs the cloth first, and tell us the reason when you order. If the stitching unit has a production run scheduled, the delivery should go there. If the shop is running low on counter stock, it should go there. If both need it on the same week, we can usually split the consignment — one address takes the bulk, the other takes a smaller quantity, both drawn from the same reservation. What we would not recommend is delivering to both addresses from two separate orders, because the two deliveries will come from two different reservations and match only by coincidence.
Yes — the buyer is different. A residential Sector 31 shop is a neighbourhood retail customer, and the questions are about advice at the counter and building repeat trade. A Sector 31 Industrial Area unit is a garment producer, and the questions are about lot reservation, repeat supply across a season and delivery scheduling against a production plan. For a business that operates from both, the questions sit on both sides, and the page is written for that combined case.
Sector 31 shares its residential-plus-industrial structure with Sector 28 and Sector 29, and the Sector 28 page carries the fullest explanation of how the dual-address pattern works. For the residential shop case alone, Sector 15 covers stitching shops and Sector 14 covers fabric-only shops. For the industrial case, the Faridabad city page covers the bulk garment-unit basis and the NIT Faridabad page covers the wholesale belt basis. For a business straddling both, this page is the one written for that combined case specifically.
Three differences matter for procurement. Sector industrial areas like Sector 31 tend to be smaller-scale, with shorter runs and more flexibility on minimum quantities, which suits a business that is also selling at retail. The larger DLF and IMT belts tend to be bigger operations with longer production runs and higher minimums, which suits export consolidators and larger garment units. And a stitching unit in Sector 31 sits in the same sector as its residential shop, which means the buyer can route cloth between the two addresses without a long dispatch — a practical advantage a unit in one of the outer belts does not have.
Yes. Sample swatches are free of cost, there is no minimum order to request them, and courier charges are payable by the recipient. For a business that also stitches, ask for a cutting length rather than a swatch — a metre is enough to make a single sample garment and see how the cloth behaves on your own machines before you commit to a stock order.
Sector 28 carries the introduction to the dual-address pattern — how two buyers sit under one sector number and how each is served. Sector 31 is one of the sectors with that structure and this page takes it further, covering the specific case of a business operating from both addresses at once: how to buy, how to split a single reservation across both, how to route delivery, and how to avoid the shade mismatches that come from treating the shop and the unit as two separate buyers. If you operate from only one side, the Sector 28 page is the better read. If you operate from both, this page is written for you.